Table of Contents

What is UBRT-2300 V4 17 and how to use it?

UBRT-2300 V4 17 is a software program developed by Robot_Labs that can repair and calibrate laptop batteries, drone batteries, and other devices that use smart batteries. It works with EV2300 or EV2400 interface boards and supports various battery models and protocols. In this article, we will explain what UBRT-2300 V4 17 can do and how to use it.

Features of UBRT-2300 V4 17

UBRT-2300 V4 17 has many features that make it a powerful and versatile tool for battery repair and calibration. Some of these features are:

• It can read and write battery data such as serial number, model number, manufacturer name, firmware version, cycle count, capacity, voltage, current, temperature, etc.
• It can reset battery protection circuits and clear error codes.
• It can modify battery parameters such as design capacity, full charge capacity, charge current limit, discharge current limit, etc.
• It can perform battery calibration by discharging and charging the battery to improve its accuracy and performance.
• It can update battery firmware and change battery protocol.
• It can clone battery data from one battery to another.
• It can generate reports and graphs of battery data and calibration results.
• It can support multiple languages such as English, Russian, Chinese, etc.

How to use UBRT-2300 V4 17

To use UBRT-2300 V4 17, you need to have a compatible interface board (EV2300 or EV2400), a USB cable, a power supply, and a battery connector. You also need to install the software on your computer and run it as administrator. The steps to use UBRT-2300 V4 17 are as follows:

1. Connect the interface board to your computer via USB cable.
2. Connect the power supply to the interface board and turn it on.
3. Connect the battery connector to the interface board and the battery you want to repair or calibrate.
4. Launch UBRT-2300 V4 17 on your computer and select the language you prefer.
5. Select the battery model and protocol from the drop-down menu or click on “Auto Detect” to let the software identify the battery automatically.
6. Click on “Read” to read the battery data and display it on the screen.
7. If you want to modify any battery parameter, click on “Write” and enter the new value in the corresponding field. Then click on “Write” again to save the changes.
8. If you want to reset the protection circuit or clear the error codes, click on “Reset” and follow the instructions on the screen.
9. If you want to perform a calibration, click on “Calibration” and select the mode you want (full calibration or quick calibration). Then click on “Start” and wait for the process to finish. The software will show you the progress and results of the calibration.
10. If you want to update the firmware or change the protocol, click on “Firmware” and select the file you want to load. Then click on “Update” and wait for the process to finish. The software will show you the progress and status of the update.
11. If you want to clone the data from one battery to another, click on “Clone” and select the source battery and the target battery. Then click on “Start” and wait for the process to finish. The software will show you the progress and results of the cloning.
12. If you want to generate a report or a graph of the battery data or calibration results, click on “Report” or “Graph” and select the options you want. Then click on “Save” or “Print” to save or print the report or graph.

Note: Before using UBRT-2300 V4 17, make sure you read the user manual carefully and follow all the safety precautions. Do not use UBRT-2300 V4 17 for batteries that are damaged, swollen