Table of Contents

How to Flash QMobile I8i SPD Stock Firmware

QMobile I8i is a budget-friendly Android smartphone that runs on a Spreadtrum (SPD) chipset. If you want to upgrade, downgrade, or reinstall the stock firmware on your device, you will need the QMobile I8i SPD stock firmware file and the SPD flash tool. In this article, we will show you how to flash QMobile I8i SPD stock firmware using the SPD Upgrade Tool.

What is QMobile I8i SPD Stock Firmware?

Stock firmware is the official software that comes pre-installed on your device. It contains the operating system, apps, and settings that are optimized for your device. Flashing stock firmware can help you fix software issues, such as bootloop, lag, virus infection, or performance problems. It can also help you restore your device to its factory state if you want to sell it or give it away.

QMobile I8i SPD stock firmware is a specific type of stock firmware that is compatible with the Spreadtrum chipset of your device. You cannot flash any other type of firmware on your device, as it may cause serious damage or brick your device. You can download the QMobile I8i SPD stock firmware file from the links given below.

How to Flash QMobile I8i SPD Stock Firmware?

To flash QMobile I8i SPD stock firmware, you will need the following tools and files:

• A Windows PC
• A USB cable
• QMobile I8i USB drivers (download from here)
• SPD Upgrade Tool (download from here)
• IMEI Tool (download from here)
• QMobile I8i SPD stock firmware file (download from here)

Once you have downloaded and extracted all the files, follow these steps to flash QMobile I8i SPD stock firmware:

1. Install the QMobile I8i USB drivers on your PC.
2. Launch the SPD Upgrade Tool by clicking on the ResearchDownload.exe file.
3. Click on Load Packet and choose the QMobile I8i SPD stock firmware file (with .pac extension).
4. Connect your device to the PC using the USB cable. Make sure your device is switched off.
5. Click on Start Downloading to begin the flashing process.
6. Wait for the process to complete. Your device will reboot several times during the process.
7. Once the process is finished, you will see a Passed message in green color.
8. Disconnect your device from the PC and use the IMEI Tool to flash the original IMEI of your device.
9. Congratulations! You have successfully flashed QMobile I8i SPD stock firmware on your device.

Tips and Warnings

• Before flashing stock firmware, make sure to backup all your important data, as it will be erased during the process.
• Make sure your device has at least 50% battery charge before flashing stock firmware.
• Do not disconnect or interrupt the flashing process, as it may cause serious damage or brick your device.
• Follow the instructions carefully and do not skip any step.
• We are not responsible for any damage or loss caused by flashing stock firmware. Do it at your own risk.