How to Reset Epson L120 Printer Using AdjProg Software


How to Reset Epson L120 Printer Using AdjProg Software

If you own an Epson L120 printer, you may encounter a problem where the printer stops working and displays an error message that says “The printer’s ink pads are at the end of their service life. Please contact Epson support.” This means that the waste ink pad counter has reached its maximum limit and needs to be reset.

One way to reset the waste ink pad counter is to use a software called AdjProg. AdjProg is a portable software that can reset the counter without installing anything on your computer. However, you need to download the correct version of AdjProg for your printer model and follow some steps carefully.

In this article, we will show you how to download and use AdjProg to reset your Epson L120 printer.

Step 1: Download AdjProg for Epson L120

You can download AdjProg for Epson L120 from this link: https://eldya.com/download-adjprog-l120/ [^1^]. This is a trusted source that provides the full version of the software for free. After downloading, you need to extract the .rar file using a program like WinRAR or 7-Zip.

Step 2: Run AdjProg as Administrator


Step 1: Download AdjProg for Epson L120

After extracting the file, you will see a folder named “AdjProg L120”. Inside this folder, you will find an executable file named “AdjProg cracked.exe”. You need to right-click on this file and select “Run as administrator”. This will open the software interface.

Step 3: Select Your Printer Port


Step 2: Run AdjProg as Administrator

On the software interface, you will see a button labeled “Select”. Click on this button and choose your printer port from the drop-down menu. Usually, it is USB001 (L120 Series). If your printer is not detected, make sure it is connected properly and turned on.

Step 4: Choose Particular Adjustment Mode

After selecting your printer port, click on “Particular adjustment mode”. This will take you to another window where you can choose different options for adjusting your printer. For resetting the waste ink pad counter, you need to select “Waste ink pad counter” and click “OK”.

Step 5: Check and Initialize the Counter


Step 4: Choose Particular Adjustment Mode

On the next window, you will see a table with different values for the waste ink pad counter. You need to check the box next to “Main pad counter” and click on “Check”. This will show you the current value of the counter and its maximum limit. If it shows 100%, it means that your counter has reached its limit and needs to be reset.

To reset the counter, check the box next to “Main pad counter” again and click on “Initialize”. This will reset the counter to zero and display a message that says “Please turn off your printer”. Click “OK” and turn off your printer.

Step 6: Restart Your Printer

After turning off your printer, wait for a few seconds and turn it on again. Your printer will perform some calibration processes before it can be used normally. Once it is ready, you can print again without any error messages.

Conclusion

In this article, we have shown you how to reset your Epson L120 printer using AdjProg software. This is a simple and effective way to solve the problem of waste ink pad counter overflow. However, you should be careful when using this software and follow the steps exactly as described. Otherwise, you may damage your printer or void its warranty.

If you have any questions or problems with using AdjProg, please leave a comment below or contact Epson support for assistance.