How to Install and Use EasyCap 4CH USB Video Capture Dongle on Windows 7 64 bit
How to Install and Use EasyCap 4CH USB Video Capture Dongle on Windows 7 64 bit
If you have an EasyCap 4CH USB video capture dongle, you might be wondering how to install and use it on your Windows 7 64 bit computer. This device allows you to capture video from four different sources, such as cameras, VCRs, DVD players, or game consoles, and save them on your hard drive or burn them to a disc. You can also use it to monitor your security cameras or record your gameplay.
In this article, we will show you how to download and install the driver for the EasyCap 4CH USB video capture dongle, and how to use the included software to capture and edit your videos.
Step 1: Download and Install the Driver
The first thing you need to do is to download and install the driver for the EasyCap 4CH USB video capture dongle. You can find the driver here: EasyCap 4CH USB Video Capture Dongle Driver. This driver is compatible with Windows 7, Windows 7 64 bit, and Windows 10 64 bit.
To install the driver, follow these steps:
- Save the downloaded file on an accessible location (such as your desktop).
- Unzip the file and enter the newly-created directory.
- Locate and double-click on the setup file.
- Allow Windows to run the file (if necessary).
- Read and agree to the End User Licence Agreement (EULA) and proceed with the installation process.
- Follow the on-screen instructions.
- Close the wizard and reboot your computer to allow changes to take effect.
Step 2: Connect the EasyCap 4CH USB Video Capture Dongle
After installing the driver, you need to connect the EasyCap 4CH USB video capture dongle to your computer and your video sources. To do this, follow these steps:
- Plug one end of the USB cable into the EasyCap dongle and the other end into a free USB port on your computer.
- Plug one end of the RCA cable into the EasyCap dongle and the other end into your video source (such as a camera, VCR, DVD player, or game console). You can use up to four video sources at the same time.
- If your video source has an S-Video output, you can use an S-Video cable instead of an RCA cable for better quality. Plug one end of the S-Video cable into the EasyCap dongle and the other end into your video source.
- If your video source has audio output, you can use an audio cable to connect it to the EasyCap dongle. Plug one end of the audio cable into the EasyCap dongle and the other end into your video source.
- If your computer has a microphone input, you can also use an audio cable to connect it to the EasyCap dongle. Plug one end of the audio cable into the EasyCap dongle and the other end into your computer’s microphone input. This will allow you to record narration or commentary for your videos.
Step 3: Use the Included Software to Capture and Edit Your Videos
The EasyCap 4CH USB video capture dongle comes with a software called SuperViewer that allows you to capture and edit your videos. To use this software, follow these steps:
- Launch SuperViewer from your desktop or start menu.
- Enter “0000” as the password when prompted.
- Select “Device Settings” from the menu bar and choose “USB DVR Device” as your video device.
- Select “Video Settings” from the menu bar and adjust the parameters according to your preferences. You can choose between PAL or NTSC format, change the resolution, frame rate, brightness, contrast, saturation, hue, etc.
- Select “Record Settings” from the menu bar and choose where you want to save your captured videos. You can also choose between AVI
Leave a Reply