Table of Contents

HDD Low Level Format Tool v4.12: A Free Utility for Formatting Hard Drives

If you need to format your hard drive and erase all the data on it, you may want to use a low-level format tool. A low-level format tool is a software that writes zeros to every sector of the drive, making it impossible to recover any data. This can be useful if you want to sell or donate your drive, or if you want to fix some errors or bad sectors.

One of the free utilities that can perform a low-level format is HDD Low Level Format Tool v4.12. This tool is developed by HDDGURU.COM and supports most interfaces, such as SATA, IDE, SCSI, SAS, USB, FireWire, and eSATA. It also works with any external drive enclosures and flash cards using a card-reader.

HDD Low Level Format Tool v4.12 is easy to use and has a simple interface. You just need to select the drive you want to format, choose the low-level format option, and click Start. The tool will show you the progress and the estimated time remaining. The speed of the process depends on the size and speed of your drive, but it can be up to 50 MB per second.

Before using HDD Low Level Format Tool v4.12, you should be aware of some important points:

• The tool is free for personal and home use, but it has a speed limit of 180 GB per hour. If you want to remove this limit, you can buy a personal license for $3.30 or a commercial license for $27.00.
• The tool will erase all the data on your drive, including partitions and MBR data. You will not be able to recover any data after using this tool.
• The tool may not work with some drives that have a firmware lock or a password protection.
• The tool may not fix all the errors or bad sectors on your drive. Some physical damage may be irreversible.

If you are looking for a free and simple way to format your hard drive at a low level, you can download HDD Low Level Format Tool v4.12 from http://hddguru.com/software/HDD-LLF-Low-Level-Format-Tool/. However, you should use this tool with caution and backup your important data before formatting.

How to Use HDD Low Level Format Tool v4.12

If you want to use HDD Low Level Format Tool v4.12 to format your hard drive, you need to follow these steps:

1. Download and install HDD Low Level Format Tool v4.12 from http://hddguru.com/software/HDD-LLF-Low-Level-Format-Tool/. You can choose the Windows Installer or the Windows Executable version. The installer will create a shortcut on your desktop, while the executable will run without installation.
2. Connect the drive you want to format to your computer. Make sure you have backed up any important data on the drive before formatting.
3. Launch HDD Low Level Format Tool v4.12 and select the drive from the list of available devices. You can see the model, serial number, size, and interface of the drive.
4. Click Continue and then click Low-Level Format. You will see a warning message that reminds you that all the data on the drive will be erased and that data restoration is impossible after using this tool. Click Yes if you are sure you want to proceed.
5. The tool will start formatting the drive and show you the progress and the estimated time remaining. You can also see the current speed and temperature of the drive. Do not interrupt the process or turn off your computer until it is finished.
6. When the formatting is completed, you will see a message that says “Format Completed Successfully”. Click OK and then click Exit.
7. Your drive is now formatted at a low level and ready for partitioning and formatting with a file system.

HDD Low Level Format Tool v4.12 is a simple and effective tool for low-level formatting of hard drives and flash cards. However, it should be used with caution and only when necessary, as it will erase all the data on your drive permanently.